Premstrip Emulsion Polish Floor Stripper (5Ltr)
Emulsion polish stripper suitable for use on sealed porous floors such as wood, concrete and vinyl.
Premstrip is an ammonia-free, quick-action emulsion polish stripper based on highly active low odour amines and alkalis. Formulated for the rapid removal of Premiere metallised emulsion polishes M.E.7, Platinum 18 and Platinum 25, it is equally effective for the removal of any metallised or alkali sensitive water-based emulsions.
Premstrip is suitable for use on sealed porous floors such as wood, cork, granwood, asphalt, magnesite, and concrete as well as vinyl, vinyl asbestos, thermoplastic, linoleum, and rubber surfaces.
Dilution rates
- General stripping of emulsion polish: 1:10
- Removal of severe emulsion polish build-up: 1:5
Directions for use
Always wear appropriate protective clothing and read the product label and safety data sheet before use.
Areas should be well ventilated during any stripping procedures. Do not allow any of the Premiere strippers to come into contact with painted or varnished surfaces such as skirtings, furniture or fixtures and fittings.
- Liberally apply diluted Premstrip to floor surfaces
- Allow 7-8 minutes of contact time, ensuring that the floor remains wet
- For best results scrub the floor area using a single disc rotary machine fitted with a black nylon stripping pad of nylon scrubbing brush. Where machinery is not available the floor should be scrubbed manually using a deck scrubber or edging tool.
- For best results remove the slurry using a wet pick-up machine. Where machinery is not available the slurry should be removed using a mopping system.
- Rinse thoroughly with a clean mop and freshwater
- For best results remove the excess rinse water using a wet pick-up machine. Where machinery is not available the rinse water should be removed using a mopping system.
- Allow the floor area to dry thoroughly before applying new coats of polish.
| Size | 5Ltr |
|---|---|
| Size |
| Absorbency | |
|---|---|
| Accuracy | |
| Application | |
| Arch | |
| Automation | |
| Battery Life | |
| Bristles | |
| Capacity | |
| Cleaner Type | |
| Closure Type | |
| Colour | |
| Colour Temperature | |
| Configuration | |
| Container | |
| Cuff | |
| Density | |
| Depth | |
| Display | |
| Doors | |
| Door Type | |
| Speed | |
| Filter Level | |
| Fitment | |
| Fold | |
| Fragrance | |
| Further Information | |
| Gauge | |
| Gender | |
| Grade | |
| Grit | |
| gsm | |
| Height | |
| Housing Construction | |
| Illumination | |
| Impervious | |
| Instrument Size | |
| Insufflation Bulb | |
| Interface | |
| Length | |
| Light Intensity | |
| Magnification | |
| Magnification/Working Distance | |
| Material | |
| Maximum Temperature | |
| Max Height | |
| Mhz | |
| Minimum Height | |
| Minimum Temperature | |
| Needle Diameter | |
| Needle Length | |
| Oxygen Percent | |
| Pack Size | 1 |
| Panels | |
| Ply | |
| Polorisation | |
| Powder | |
| Power Source | |
| Precision | |
| Prefilled | |
| Reinforced | |
| Resistance | |
| Ruler | |
| Shape | |
| Shelves | |
| Side | |
| Size | 5Ltr |
| Size | |
| Softness | |
| Spot Size | |
| Sterility | |
| Strength | |
| Thickness | |
| Tip | |
| Trays | |
| Tube Length | |
| Tube Type | |
| Type | |
| Type of Light | |
| Usage | |
| Viewing window | |
| Volume | |
| Waste Type | |
| Width | |
| Working Distance |
| GTIN | |
|---|---|
| Manufacturer | Premiere |
| MPN | P06024-5LX2-PREM |
| Warranty |
| Delivery Time |
|---|
Premstrip is an ammonia-free, quick-action emulsion polish stripper based on highly active low odour amines and alkalis. Formulated for the rapid removal of Premiere metallised emulsion polishes M.E.7, Platinum 18 and Platinum 25, it is equally effective for the removal of any metallised or alkali sensitive water-based emulsions.
Premstrip is suitable for use on sealed porous floors such as wood, cork, granwood, asphalt, magnesite, and concrete as well as vinyl, vinyl asbestos, thermoplastic, linoleum, and rubber surfaces.
Dilution rates
- General stripping of emulsion polish: 1:10
- Removal of severe emulsion polish build-up: 1:5
Directions for use
Always wear appropriate protective clothing and read the product label and safety data sheet before use.
Areas should be well ventilated during any stripping procedures. Do not allow any of the Premiere strippers to come into contact with painted or varnished surfaces such as skirtings, furniture or fixtures and fittings.
- Liberally apply diluted Premstrip to floor surfaces
- Allow 7-8 minutes of contact time, ensuring that the floor remains wet
- For best results scrub the floor area using a single disc rotary machine fitted with a black nylon stripping pad of nylon scrubbing brush. Where machinery is not available the floor should be scrubbed manually using a deck scrubber or edging tool.
- For best results remove the slurry using a wet pick-up machine. Where machinery is not available the slurry should be removed using a mopping system.
- Rinse thoroughly with a clean mop and freshwater
- For best results remove the excess rinse water using a wet pick-up machine. Where machinery is not available the rinse water should be removed using a mopping system.
- Allow the floor area to dry thoroughly before applying new coats of polish.
| Size | 5Ltr |
|---|---|
| Size |
| Absorbency | |
|---|---|
| Accuracy | |
| Application | |
| Arch | |
| Automation | |
| Battery Life | |
| Bristles | |
| Capacity | |
| Cleaner Type | |
| Closure Type | |
| Colour | |
| Colour Temperature | |
| Configuration | |
| Container | |
| Cuff | |
| Density | |
| Depth | |
| Display | |
| Doors | |
| Door Type | |
| Speed | |
| Filter Level | |
| Fitment | |
| Fold | |
| Fragrance | |
| Further Information | |
| Gauge | |
| Gender | |
| Grade | |
| Grit | |
| gsm | |
| Height | |
| Housing Construction | |
| Illumination | |
| Impervious | |
| Instrument Size | |
| Insufflation Bulb | |
| Interface | |
| Length | |
| Light Intensity | |
| Magnification | |
| Magnification/Working Distance | |
| Material | |
| Maximum Temperature | |
| Max Height | |
| Mhz | |
| Minimum Height | |
| Minimum Temperature | |
| Needle Diameter | |
| Needle Length | |
| Oxygen Percent | |
| Pack Size | 1 |
| Panels | |
| Ply | |
| Polorisation | |
| Powder | |
| Power Source | |
| Precision | |
| Prefilled | |
| Reinforced | |
| Resistance | |
| Ruler | |
| Shape | |
| Shelves | |
| Side | |
| Size | 5Ltr |
| Size | |
| Softness | |
| Spot Size | |
| Sterility | |
| Strength | |
| Thickness | |
| Tip | |
| Trays | |
| Tube Length | |
| Tube Type | |
| Type | |
| Type of Light | |
| Usage | |
| Viewing window | |
| Volume | |
| Waste Type | |
| Width | |
| Working Distance |
| GTIN | |
|---|---|
| Manufacturer | Premiere |
| MPN | P06024-5LX2-PREM |
| Warranty |
| Delivery Time |
|---|
Premstrip is an ammonia-free, quick-action emulsion polish stripper based on highly active low odour amines and alkalis. Formulated for the rapid removal of Premiere metallised emulsion polishes M.E.7, Platinum 18 and Platinum 25, it is equally effective for the removal of any metallised or alkali sensitive water-based emulsions.
Premstrip is suitable for use on sealed porous floors such as wood, cork, granwood, asphalt, magnesite, and concrete as well as vinyl, vinyl asbestos, thermoplastic, linoleum, and rubber surfaces.
Dilution rates
- General stripping of emulsion polish: 1:10
- Removal of severe emulsion polish build-up: 1:5
Directions for use
Always wear appropriate protective clothing and read the product label and safety data sheet before use.
Areas should be well ventilated during any stripping procedures. Do not allow any of the Premiere strippers to come into contact with painted or varnished surfaces such as skirtings, furniture or fixtures and fittings.
- Liberally apply diluted Premstrip to floor surfaces
- Allow 7-8 minutes of contact time, ensuring that the floor remains wet
- For best results scrub the floor area using a single disc rotary machine fitted with a black nylon stripping pad of nylon scrubbing brush. Where machinery is not available the floor should be scrubbed manually using a deck scrubber or edging tool.
- For best results remove the slurry using a wet pick-up machine. Where machinery is not available the slurry should be removed using a mopping system.
- Rinse thoroughly with a clean mop and freshwater
- For best results remove the excess rinse water using a wet pick-up machine. Where machinery is not available the rinse water should be removed using a mopping system.
- Allow the floor area to dry thoroughly before applying new coats of polish.
