NorMors Chin Collar (10)
NorMors’ chin-collar is easy to install and is almost invisible once it has been put in place. NorMors’ chin-collar is a simple collar that is put around half of the deceased’s neck and supported by the collarbone. It is partly hidden by the deceased’s shirt or blouse.
Key Features & Benefits
- Easy to put on, can be carried out by one person.
- Not very visible.
- The face and hair are not covered and the deceased is more recognisable.
- The shape of the face remains intact, without folds in the cheeks as is the case with chin bandages.
- NorMors’ chin-collar is degradable.
- The chin-collar does not emit any waste gases when burned.
- Available in sizes medium or large
- Supplied in a pack of 10
Directions for use
1: The chin-collar must be put on the deceased when he/she is first made ready, before rigor mortis sets in. The deceased must lie on his/her back preferably with a little pillow under the head.
2: Make sure the smaller arch is placed under the chin. The longer arch will then lie against the breast and collarbone once the collar is on.
3: Take hold of the thickest part of the Chin-collar with both hands. Pull this out sufficiently and push it in towards the deceased’s neck. It is important to get the chin-collar as close to the neck as possible. This may take some force.
After NorMors Chin-collar is mounted you can adjust any folds on the face by pulling skin "inside" the Chin-collar.
| Size | |
|---|---|
| Size |
| Absorbency | |
|---|---|
| Accuracy | |
| Application | |
| Arch | |
| Automation | |
| Battery Life | |
| Bristles | |
| Capacity | |
| Cleaner Type | |
| Closure Type | |
| Colour | |
| Colour Temperature | |
| Configuration | |
| Container | |
| Cuff | |
| Density | |
| Depth | |
| Display | |
| Doors | |
| Door Type | |
| Speed | |
| Filter Level | |
| Fitment | |
| Fold | |
| Fragrance | |
| Further Information | |
| Gauge | |
| Gender | |
| Grade | |
| Grit | |
| gsm | |
| Height | |
| Housing Construction | |
| Illumination | |
| Impervious | |
| Instrument Size | |
| Insufflation Bulb | |
| Interface | |
| Length | |
| Light Intensity | |
| Magnification | |
| Magnification/Working Distance | |
| Material | |
| Maximum Temperature | |
| Max Height | |
| Mhz | |
| Minimum Height | |
| Minimum Temperature | |
| Needle Diameter | |
| Needle Length | |
| Oxygen Percent | |
| Pack Size | |
| Panels | |
| Ply | |
| Polorisation | |
| Powder | |
| Power Source | |
| Precision | |
| Prefilled | |
| Reinforced | |
| Resistance | |
| Ruler | |
| Shape | |
| Shelves | |
| Side | |
| Size | |
| Size | |
| Softness | |
| Spot Size | |
| Sterility | |
| Strength | |
| Thickness | |
| Tip | |
| Trays | |
| Tube Length | |
| Tube Type | |
| Type | |
| Type of Light | |
| Usage | |
| Viewing window | |
| Volume | |
| Waste Type | |
| Width | |
| Working Distance |
| GTIN | |
|---|---|
| Manufacturer | |
| MPN | |
| Warranty |
| Delivery Time |
|---|
NorMors’ chin-collar is easy to install and is almost invisible once it has been put in place. NorMors’ chin-collar is a simple collar that is put around half of the deceased’s neck and supported by the collarbone. It is partly hidden by the deceased’s shirt or blouse.
Key Features & Benefits
- Easy to put on, can be carried out by one person.
- Not very visible.
- The face and hair are not covered and the deceased is more recognisable.
- The shape of the face remains intact, without folds in the cheeks as is the case with chin bandages.
- NorMors’ chin-collar is degradable.
- The chin-collar does not emit any waste gases when burned.
- Available in sizes medium or large
- Supplied in a pack of 10
Directions for use
1: The chin-collar must be put on the deceased when he/she is first made ready, before rigor mortis sets in. The deceased must lie on his/her back preferably with a little pillow under the head.
2: Make sure the smaller arch is placed under the chin. The longer arch will then lie against the breast and collarbone once the collar is on.
3: Take hold of the thickest part of the Chin-collar with both hands. Pull this out sufficiently and push it in towards the deceased’s neck. It is important to get the chin-collar as close to the neck as possible. This may take some force.
After NorMors Chin-collar is mounted you can adjust any folds on the face by pulling skin "inside" the Chin-collar.
| Size | |
|---|---|
| Size |
| Absorbency | |
|---|---|
| Accuracy | |
| Application | |
| Arch | |
| Automation | |
| Battery Life | |
| Bristles | |
| Capacity | |
| Cleaner Type | |
| Closure Type | |
| Colour | |
| Colour Temperature | |
| Configuration | |
| Container | |
| Cuff | |
| Density | |
| Depth | |
| Display | |
| Doors | |
| Door Type | |
| Speed | |
| Filter Level | |
| Fitment | |
| Fold | |
| Fragrance | |
| Further Information | |
| Gauge | |
| Gender | |
| Grade | |
| Grit | |
| gsm | |
| Height | |
| Housing Construction | |
| Illumination | |
| Impervious | |
| Instrument Size | |
| Insufflation Bulb | |
| Interface | |
| Length | |
| Light Intensity | |
| Magnification | |
| Magnification/Working Distance | |
| Material | |
| Maximum Temperature | |
| Max Height | |
| Mhz | |
| Minimum Height | |
| Minimum Temperature | |
| Needle Diameter | |
| Needle Length | |
| Oxygen Percent | |
| Pack Size | |
| Panels | |
| Ply | |
| Polorisation | |
| Powder | |
| Power Source | |
| Precision | |
| Prefilled | |
| Reinforced | |
| Resistance | |
| Ruler | |
| Shape | |
| Shelves | |
| Side | |
| Size | |
| Size | |
| Softness | |
| Spot Size | |
| Sterility | |
| Strength | |
| Thickness | |
| Tip | |
| Trays | |
| Tube Length | |
| Tube Type | |
| Type | |
| Type of Light | |
| Usage | |
| Viewing window | |
| Volume | |
| Waste Type | |
| Width | |
| Working Distance |
| GTIN | |
|---|---|
| Manufacturer | |
| MPN | |
| Warranty |
| Delivery Time |
|---|
NorMors’ chin-collar is easy to install and is almost invisible once it has been put in place. NorMors’ chin-collar is a simple collar that is put around half of the deceased’s neck and supported by the collarbone. It is partly hidden by the deceased’s shirt or blouse.
Key Features & Benefits
- Easy to put on, can be carried out by one person.
- Not very visible.
- The face and hair are not covered and the deceased is more recognisable.
- The shape of the face remains intact, without folds in the cheeks as is the case with chin bandages.
- NorMors’ chin-collar is degradable.
- The chin-collar does not emit any waste gases when burned.
- Available in sizes medium or large
- Supplied in a pack of 10
Directions for use
1: The chin-collar must be put on the deceased when he/she is first made ready, before rigor mortis sets in. The deceased must lie on his/her back preferably with a little pillow under the head.
2: Make sure the smaller arch is placed under the chin. The longer arch will then lie against the breast and collarbone once the collar is on.
3: Take hold of the thickest part of the Chin-collar with both hands. Pull this out sufficiently and push it in towards the deceased’s neck. It is important to get the chin-collar as close to the neck as possible. This may take some force.
After NorMors Chin-collar is mounted you can adjust any folds on the face by pulling skin "inside" the Chin-collar.
